Above is a before and after picture of an old, tired heat exchanger and a new drop in replacement shell & tube exchanger that Thermal Products Inc designed and supplied as a drop in replacement heat exchanger to replace a modified Taco “E” BEU series heat exchanger. After meeting with the customer, a local state government, Thermal Products was able to offer one of our “Drop In Replacement” Heat Exchangers so piping changes would NOT be necessary. All critical center line dimensions were held.
Thermal Products offered a TPI-BEU-26-84-2, which is a 26” diameter shell, 84” tube length U-tube bundle, 2 pass tube side arrangement for steam to water application. We offered an all carbon steel constructed shell and head with ¾”, .049 wall copper tubes. The heat exchanger was built to ASME Code and stamped for 150 PSIG @ 375F. Higher temperature and pressure available upon request.
Although we supplied standard materials of carbon steel and copper tubing, Thermal Products, can readily supply Stainless steel shells and heads and stainless steel tubing, Cupro-Nickel tubing, admiralty tubing, Hastelloy, Titanium, AL-6XN among more.
If your shell and head or bonnet are in good condition, we can simply offer a replacement tube bundle instead. Replacing your tube bundle only with one of Thermal Products quality Drop In Replacement Tube bundles would make your project far less difficult and time consuming. In most cases, a Thermal Products replacement tube bundle comes with a .049 tube wall thickness, when most OEM tube bundles are supplied with .035 wall tubing, making your Thermal Products tube bundle more forgiving to tube side erosion from particulate in your water. Simply call your local Thermal Products office with your heat exchanger model number or picture of your heat exchanger nameplate and we’ll provide a quote to you, in most cases, the same day. All Thermal Products tube bundles come with gaskets.
All of our “Drop In Replacement” Heat Exchangers and Tube Bundles can fit identically to any of the heat exchangers made by Taco, Armstrong, Bell & Gossett, Thrush, ITT, Basco, Adamson, American Standard, Yula, Patterson-Kelly and many more, saving your company money and man hours. Contact us today!
I know we are all enjoying our summer weather, but now is the time review your heat exchanger, tube bundle and steam and water coil needs.
Thermal Products Inc can offer direct replacement and new application tube bundles for many manufacturers below. All we need is the manufacturer and complete model number, thus providing our customers with tube bundles that are of the same (or greater) quality than the original, while simultaneously matching the dimensions and performance of your existing unit.
Thermal Products standard tube bundles ship 2-3 weeks after receipt of purchase order and data approval.
Thermal Products Can Cross Reference Your Tube Bundle From The Following Manufacturers
Bell & Gosset
Thermal Products can manufacture your “drop-in” complete heat exchanger, tube bunlde or coil from the following materials
304, 316 , 317 and 321stainless steel and more..
RUSH/EMERGENCY SHIPMENTS are available when delivery is critical.
Tube Bundle Capabilities Include, But Are Not Limited To:
4" nominal to 60" nominal
U-Tube, or Straight Tube (Fixed Tubesheet or Floating Tubesheet)
Enhanced Tube, Low-Fin, Lo-Fin, Intergral Tube Bundles (U-Tube or Straight Tube)
Tank Heater Tube Bundles
Fuel Oil Heater Tube Bundles
Double Wall Vented Tube Bundles
Standard & Specialty Alloys
Heads & Bonnets
Tank Collars & Nozzles
A.S.M.E. Stamping Available
Not Sure How to Measure a Tube Bundle?
Check out our online/printable tube bundle dimension sheets!
Thermal Products engineering and sales staff will assist you with designing and sizing your tube bundle. We can fabricate to your specifications, cross-referencing your current make & model or take on-site measurements.
If you are unsure if you need a new unit or a repair, ship your existing tube bundle to the Thermal Products facility for a diagnosis. We will advise you on your options and offer a quote prior to doing any work. No order is necessary and most tube bundles are diagnosed free of charge.
Contact us today to see if we can diagnose your tube bundle free of charge.
24 Hour Next Day Shipment
Your order will ship the next business day, if placed before 11:00 pm EST.
48 Hour Shipment
Your order will ship within 2 business days from the time of order.
5 Day Shipment
Your order will ship within 5 business days from the time of order.
10 Day Shipment
Your order will ship within 10 business days from the time of order.
Tube Bundles: Within 2 to 3 weeks.
Heat Exchangers: Within 5 to 6 weeks.
Custom Heat Exchangers: Depends on size and complexity, call for estimate.
Retube/Repair Tube Bundles: Within 2 weeks.
Standard and Rush Shipment lead times may vary, call for availability.