Information & Resources

Please browse through our archive of selected articles, industry news and expert opinions

Thermal Products Inc, will be participating at the Craft Brewers Conference (CBC) & Brew Expo America in our nation’s Capital, Washington D.C., together with our partners Advantage Engineering http://thermalproducts.com/products/chillers/advantage-engineering and Enerquip Heat Exchangers http://thermalproducts.com/products/shell-tube-heat-exchangers/enerquip

This annual event allows exhibitors and buyers to develop profitable business relationships and helps brewing and brewery restaurant professionals encounter the latest and best products and services that industry vendors have to offer.

We’ll be there to show ours!

Please visit Scott Robinson of Thermal Products and our partners at the booth locations below.

Advantage Engineering Booth #645

Enerquip Heat Exchangers Booth #2002

Off-The-Shelf Sanitary and Utility Heat Exchangers

U-Tube Shell & Tube Heat Exchangers

Top producers of food, beverage, dairy and process products put their faith in Thermal Products and Enerquip, the leading provider of sanitary and industrial stainless steel shell and tube heat exchangers, for your critical heating and cooling needs.

Thermal Products and Enerquip’s resourceful team can provide you with sizing and design selection assistance. Our skilled sales engineers use state-of-the-art modeling software to recommend the right heat exchanger for each heating or cooling application. Your end result will be a high quality, sanitary or industrial heat exchanger with lead-times that are half of the industry average.

Thermal Products and Enerquip's 40 standard sized heat exchangers are either in stock or available to be shipped in days instead of months.

Contact us for quick shipping requirements today!

What sets Thermal Products and Enerquip’s sanitary shell and tube exchangers apart?

100% 304 stainless steel construction for corrosion resistance and cleanliness.

Built to high quality TEMA C guidelines, ASME hydro-tested and code stamped.

The perfect choice for heating or cooling low-fouling fluids.

Sanitary tri-clamp connections on the process side allow for easy installation.

U-tube design allows tubes to expand and contract freely to prevent damage.

Removable/replaceable tube bundle and o-rings make replacement quick and easy.

Wide selection of sizes from 4” diameter to 10” diameter in lengths up to 9’ long.

Heat exchangers built to 3-A standard 12-07 are available as an upgrade.

Options Available (Not all of these are Off-the-Shelf options.) :

Insulation and cladding with stainless steel jacket for heat conservation and personnel protection

Mounting foot supports – horizontal clamp-on saddles or vertical welded lugs

Baffle & connection changes for liquid to liquid applications

Upgrades to 3-A or double tubesheet design for high purity applications

Passivation and/or electro-polished product contact surfaces

Available in material upgrades to 316Lss, Duplex, Hastelloy, AL6XN and other alloys

Multiple-pass tubesheets and bonnets for a higher tubeside velocity in a small space

What about special requirements?

Thermal Products has a solution for the most unusual requirements and can custom design a shell and tube heat exchanger that will meet your specific application, size, special alloy or configuration in Sanitary or Utility applications. Contact us today!

High Temperature Vacuum Air to Air Heat Exchanger 

Thermal Products was asked to design a custom air-to-air heat exchanger designed to cool 2,346 ACFM air from 750F to 194F at a negative pressure of 10.1” hg. The design ambient air temperature of 149F created a very tight approach temperature that we needed to overcome. The Maximum Noise level required was 85 dba at the heat exchanger. Maximum pressure drop required was .12” HG.

Installation location is in the upper housing of vacuum crane for loading and offloading ships and barges. Overall size and weight was critical to the design.

1

Thermal Products designed and built the above/below custom air-to-air heat exchanger. The overall construction was from carbon steel with the Heat Exchanger Coil manufactured for cleanability for the extremely dusty environment. The coil was manufactured with a stainless steel inner tube and an aluminum extruded fin. The extruded fin allows our customer to clean the coils with high pressure water as part of the preventative maintenance routine.

Thermal Products used a low noise Aluminium fan that was manually adjustable to achieve the noise requirements.

Engineered solutions to industrial applications is what Thermal Products shines at. Contact us today with your custom needs.

2

Contact Us

Fields marked with * are required

Latest Articles